1. Spiral Wound Gasket
Uni Klinger spiral wound gaskets are subjected to compressibility & recovery test as per IS 7719 & sealability test are conducted at ambient/elevated pressure & temperature.
Fillers used are Graphite, Asbestos & PTFE. Compressibility & Recovery test as per IS 7719 and sealibility test are conducted at ambient pressure and temperature.
Uni Klinger Spiral wound gaskets are approved with all major consultants including EIL & TDC.
2. Metal Jacketed Gasket
All gaskets are custom built to provide accurate & easy assembly of pass partition bars into tube sheet grooves.
Metal jacketed gaskets are custom built gaskets with or without ribs & can be supplied in Carbon Steel, Soft Iron, SS304,& SS316.
3. Kammprofile Gasket
Range available:- 15 NB to 600 NB to suit ASME/ANSI B16.5 – 150# to 2500
- 10DN to 1400DN to suit DIN2697 PN10 to PN400.
- Non Standard as per customers requirement i.e. 10mm to 3000mm.
- Heat Exchanger application with all type of pass partition bar configuration
Available in MOC Metal Core: CS/SS304/SS316/SSS316L/SS321/SS347. Soft facing Material : Graphite/CAF/PTFE ( Exotic material also available on request )
4. Ring Joints
Ring Type Joints are widely used by the Oil, Gas, Petrochemical and Offshore Industries in applications subject to high pressures and temperatures.
These joints are designed to concentrate the bolt load over a small area thus producing high seating stresses.
As the ring type material should always be softer than the mating flanges, the high seating stress causes ‘plastic flow’ of the ring joint in the flange faces creating the seal. All RTJ’s are manufactured according to ASME B16.20 and API6A standard.
